Camera Strap Slip Cover

Chris gave me a new camera for my birthday.  It's been fun to have a "real" camera and I've been trying to learn how to take pretty pictures. Since I was going to be using it a lot, I decided I wanted to jazz it up a little & one of my very dear friends has the same one so this would be an easy way to tell them apart without having to check through the recent photos. I had seen camera straps on Pinterest and Etsy and decided I wanted to try to make one. My first couple of attempts were nothing short of failure, but I discovered some helpful tricks and was finally able to come out with not one, but 2 that were functional. It was pretty easy and didn't take much time. Here is a step by step if you want to make one for yourself!

**Disclaimer: I am not a skilled sewer. I bought a sewing machine just for fun and have taught myself just by practicing so this project really is easy!

Supplies:
Fun fabric (I bought a 1/2 yard of 2 different fabrics, I made 2 straps and had plenty leftover)
measuring tape
scissors & pins
interfacing or batting (this was the missing piece from my first couple tries)

1. Measure your camera strap.

2. Cut 2 strips of fabric. My strap was 1 inch wide by 28 inches long. I cut my stripes 2 inches wide & 30 inches long for plenty of seam allowance. If your fabric isn't long enough to stretch the length of your strap, you can cut smaller pieces and sew them together. I had to do that for one of mine.

My strips are folded in half in this picture.

* Take note of your fabric pattern. If you are using stripes or dots, you may want to cut according to the pattern on the fabric. This is what I did for this fabric, the cover is much wider than my actual camera strap, but it is still functional, the interfacing helps the fabric keep it's shape.

3. Pin the fabric to the interfacing and cut around the fabric. Iron the inferfacing to the wrong side of the fabric.

4. Sew the ends of your strips first. Make sure you lay your strap over your fabric strips to see how much seam allowance you have. Use something other than a straight stitch for character if desired.

5. Now you are ready to sew the strips together. Pin your strips so the right sides of the fabric are facing each other and sew a straight line all the way down. repeat on the other side

6. Turn the strap right side out. This is the hardest and longest part. The first one I did took me about half an episode of Mad Men :
* the wider your strap, the easier it is to turn it right side out

7. Slide your strap into the cover and you are ready to go!